Publication Details

The presence and nature of ellipticity in Appalachian hardwood logs

Publication Toolbox

  • Download PDF (474.0 KB)
  • This publication is available only online.

Year Published

2017

Publication

BioResources. 12(4): 8443-8450.

Abstract

The ellipticity of hardwood logs is most often observed and measured from either end of a log. However, due to the nature of hardwood tree growth and bucking practices, the assessment of ellipticity in thir manner may not be accurate. Trees grown on hillsides often develop supporting wood that gives the first few feet of the  log butt a significant degree of ellipticity, while the rest of the log may be more circular. Good log bucking methods dictate that a log be bucked near a fork or a large knot, creating a higher-valued lower log and jump cut or a lower-valued upper log. This practice and the additional suporting (buttress) wood below the knot can make the upper end of a log exhibit ellipticity. In this study, 703 hardwood logs from Appalachian forests were scanned using a high-resolution laser scanner, and the ellipticity and the angle of the greater axis was recorded for every foot along each log. Approximately one-third of the logs exhibited moderate to severe eccentricity on the small end. However, most logs (99%) did not exhibit significant ellipticity along the entire length. Furthermore, the mean length of the elliptical zone for all species was 3.3 feet.

Citation

Thomas, R. Edward; Stanovick, John S.; Conner, Deborah. 2017. The presence and nature of ellipticity in Appalachian hardwood logs. BioResources. 12(4): 8443-8450. https://doi.org/10.15376/biores.12.4.8443-8450.

Last updated on: October 2, 2017